 |
| Simply Stick, Spray, Press To Indent and Fill. |
|
|
Materials Needed: patching compound, putty knife at least 3" wide, spray bottle filled with water and sandpaper or drywall sponge (gloves recommended)
Clean away any loose debris around the area to be patched. Peel backing from The Great Wall Patch, center over damaged area, and press on. For best results, check that a minimum 1/2 inch of the plaster area of the patch is
attached to the surrounding area of the hole.
Spray plaster area of patch liberally with water. Rub gently until plaster has a milky appearance. This step activates the plaster in the Great Wall Patch.
Wait 3 to 5 minutes for patch to start to harden. Press lightly on plaster area covering the hole so that you create an indentation. If indentation does not hold it’s shape, wait a few minutes more and press again until it holds an indentation. Let patch dry completely.
Use a fast-setting patching compound and a drywall knife to fill the indented area of the patch and also thinly cover a few inches surrounding repaired area to make a flush finish with the wall. Let area dry (apply a thin second coat of patching compound if needed) sand area to a smooth and flat finish. Texture area, if needed, and prime and paint.
|
|